CM-CU385
Diesel generator set built around the Cummins NTA855-G4 engine, rated to ISO 8528-1.
- Standby rating
- 385 kVA
- Prime rating
- 350 kVA
- Engine platform
- NTA855-G4
- Frequency
- 50 Hz
Healthcare
Operating theatres, intensive care units, blood banks and imaging suites all need power that never blinks. Cunmi supplies silent and containerised sets qualified for hospital duty, including WHO-standard vaccine cold-chain installations.
The Challenge
Healthcare power requirements
A hospital standby system has to do more than start. It must transfer within the limits defined by IEC 60364-7-710 for medical locations, keep voltage deviation inside ±10 %, and stay quiet enough for a ward to sleep next to it.
We work with MEP consultants and biomedical engineers from the design stage, providing load calculations, single-line diagrams and acoustic reports for the tender package.
Recommended Products
Ratings we specify most often for Healthcare
Each rating below is a published row from the brand model tables. Open Size range for the full span, or View for the engine and alternator details.
CM-PK330
Diesel generator set built around the Perkins 1506A-E88TAG5 engine, rated to ISO 8528-1.
- Standby rating
- 330 kVA
- Prime rating
- 300 kVA
- Engine platform
- 1506A-E88TAG5
- Frequency
- 50 Hz
CM-BD500
Diesel generator set built around the Baudouin 6M21G500/5 engine, rated to ISO 8528-1.
- Standby rating
- 500 kVA
- Prime rating
- 450 kVA
- Engine platform
- 6M21G500/5
- Frequency
- 50 Hz
Solution Highlights
What makes the difference in this application
Medical-grade changeover
Automatic transfer switches designed for theatre and ICU circuits.
Low noise, low vibration
Super-silent canopies and resilient-mounted exhaust for ward-adjacent sites.
Cold-chain qualified
2 – 30 kVA packages for vaccine and blood-bank refrigeration, WHO compliant.
Tested documentation
Factory test certificates, witness testing and O&M manuals supplied.
How projects are delivered
From load schedule to commissioning in healthcare
The same three stages run on every order, whatever the configuration: engineering before the quotation, a documented load test before packing, and support after the set is on site.
Step 01
Engineering and sizing
Load schedule, starting currents, ambient and altitude derating are worked through before a rating is proposed — the alternator is sized for the largest step, not the average.
Step 02
Factory build and load test
Assembly, wiring and paint in one works, then a four-point load bank run at 25 / 50 / 75 / 100 % with the test sheet serial-numbered to the set.
Step 03
Shipping, commissioning and support
Export packing, documentation and commissioning guidance, with spare-parts supply and remote diagnosis for the life of the installation.
Related Reading
Further reading on Healthcare power
Technical articles and product updates relevant to this application.
Ready to buy?
Send us the load profile, site conditions and redundancy requirement. A Cunmi sales engineer will come back with a sized recommendation and budget quotation.
I'm ready to proceedHave a technical question?
Sizing, paralleling, noise limits or grid codes — our application engineers answer specification questions before you commit to a configuration.
I have a questionNeed service or spares?
Consumables, long-lead items and overhaul kits for the twenty most common platforms, held in regional hubs and quoted with honest lead times.
I have a service request