CM-DZ100
Diesel generator set built around the Deutz BF4M2012C G2 engine, rated to ISO 8528-1.
- Standby rating
- 100 kVA
- Prime rating
- 90 kVA
- Engine platform
- BF4M2012C G2
- Frequency
- 50 Hz
Rental & Construction
Construction sites demand power that arrives quickly, survives rough handling and runs on whatever fuel is available. Cunmi supplies towable, skid and containerised sets built for the rental and contracting market.
The Challenge
Rental & Construction power requirements
Whether it is a tower crane, a concrete batching plant or a temporary site office cluster, the generator has to be sized for the worst-case simultaneous starting scenario and still fit through the site gate.
Our construction packages are available on road-tow trailers with lights, brakes and overrun coupling, or on compact skids that a single telehandler can reposition.
Recommended Products
Ratings we specify most often for Rental & Construction
Each rating below is a published row from the brand model tables. Open Size range for the full span, or View for the engine and alternator details.
CM-PK150
Diesel generator set built around the Perkins 1106A-70TG1 engine, rated to ISO 8528-1.
- Standby rating
- 150 kVA
- Prime rating
- 135 kVA
- Engine platform
- 1106A-70TG1
- Frequency
- 50 Hz
CM-CU220
Diesel generator set built around the Cummins 6CTAA8.3-G2 engine, rated to ISO 8528-1.
- Standby rating
- 220 kVA
- Prime rating
- 200 kVA
- Engine platform
- 6CTAA8.3-G2
- Frequency
- 50 Hz
Solution Highlights
What makes the difference in this application
Towable and skid options
Road-tow trailers, lifting frames and fork pockets as standard.
Robust enclosures
Zinc-coated, powder-coated steel that survives repeated site moves.
Multi-set paralleling
Link two to eight units for growing site demand without recapitalising.
Rental-ready
Hour meters, remote monitoring and standard fleet service intervals.
How projects are delivered
From load schedule to commissioning in rental & construction
The same three stages run on every order, whatever the configuration: engineering before the quotation, a documented load test before packing, and support after the set is on site.
Step 01
Engineering and sizing
Load schedule, starting currents, ambient and altitude derating are worked through before a rating is proposed — the alternator is sized for the largest step, not the average.
Step 02
Factory build and load test
Assembly, wiring and paint in one works, then a four-point load bank run at 25 / 50 / 75 / 100 % with the test sheet serial-numbered to the set.
Step 03
Shipping, commissioning and support
Export packing, documentation and commissioning guidance, with spare-parts supply and remote diagnosis for the life of the installation.
Related Reading
Further reading on Rental & Construction power
Technical articles and product updates relevant to this application.
Ready to buy?
Send us the load profile, site conditions and redundancy requirement. A Cunmi sales engineer will come back with a sized recommendation and budget quotation.
I'm ready to proceedHave a technical question?
Sizing, paralleling, noise limits or grid codes — our application engineers answer specification questions before you commit to a configuration.
I have a questionNeed service or spares?
Consumables, long-lead items and overhaul kits for the twenty most common platforms, held in regional hubs and quoted with honest lead times.
I have a service request