CM-BD275
Diesel generator set built around the Baudouin 6M16G275/5 engine, rated to ISO 8528-1.
- Standby rating
- 275 kVA
- Prime rating
- 250 kVA
- Engine platform
- 6M16G275/5
- Frequency
- 50 Hz
Marine & Offshore
Offshore platforms, dredgers, barges and port equipment need power that survives salt spray, constant vibration and restricted maintenance windows. Cunmi builds DNV and Lloyd's surveyable offshore packages.
The Challenge
Marine & Offshore power requirements
Offshore duty is the harshest test a generator can face. Every component — from the canopy paint system to the cable glands — must be selected for a marine atmosphere, and the package must pass a third-party survey before it is accepted.
We supply containerised packages with Container Safety Convention approval and Marine C5 corrosion protection, and we can support the classification survey documentation package.
Recommended Products
Ratings we specify most often for Marine & Offshore
Each rating below is a published row from the brand model tables. Open Size range for the full span, or View for the engine and alternator details.
CM-CU275
Diesel generator set built around the Cummins 6LTAA8.9-G2 engine, rated to ISO 8528-1.
- Standby rating
- 275 kVA
- Prime rating
- 250 kVA
- Engine platform
- 6LTAA8.9-G2
- Frequency
- 50 Hz
CM-WC481
Diesel generator set built around the Weichai WP13D440E310 engine, rated to ISO 8528-1.
- Standby rating
- 481 kVA
- Prime rating
- 437.5 kVA
- Engine platform
- WP13D440E310
- Frequency
- 50 Hz
Solution Highlights
What makes the difference in this application
Marine C5 protection
Corrosion system specified for offshore and coastal atmospheres.
Classification society
Packages prepared for DNV, Lloyd's Register, BV or ABS survey.
Offshore-grade safety
Bunded tanks, emergency shutdown and deck-ready sea-fastening.
Deck-ready design
Sea-fastening points, container CSC plates and crane-certified frames.
How projects are delivered
From load schedule to commissioning in marine & offshore
The same three stages run on every order, whatever the configuration: engineering before the quotation, a documented load test before packing, and support after the set is on site.
Step 01
Engineering and sizing
Load schedule, starting currents, ambient and altitude derating are worked through before a rating is proposed — the alternator is sized for the largest step, not the average.
Step 02
Factory build and load test
Assembly, wiring and paint in one works, then a four-point load bank run at 25 / 50 / 75 / 100 % with the test sheet serial-numbered to the set.
Step 03
Shipping, commissioning and support
Export packing, documentation and commissioning guidance, with spare-parts supply and remote diagnosis for the life of the installation.
Related Reading
Further reading on Marine & Offshore power
Technical articles and product updates relevant to this application.
Ready to buy?
Send us the load profile, site conditions and redundancy requirement. A Cunmi sales engineer will come back with a sized recommendation and budget quotation.
I'm ready to proceedHave a technical question?
Sizing, paralleling, noise limits or grid codes — our application engineers answer specification questions before you commit to a configuration.
I have a questionNeed service or spares?
Consumables, long-lead items and overhaul kits for the twenty most common platforms, held in regional hubs and quoted with honest lead times.
I have a service request