CM-MT1250
Diesel generator set built around the MTU 18V2000G65 engine, rated to ISO 8528-1.
- Standby rating
- 1,250 kVA
- Prime rating
- 1,125 kVA
- Engine platform
- 18V2000G65
- Frequency
- 50 Hz
Defense & Government
Cunmi builds customised diesel power stations for defence and government duty: modular, air-transportable and ready to run the moment they arrive on site.
The Challenge
Defense & Government power requirements
Defence power has to be self-contained. There is no grid to fall back on and no second visit if a part is missing, so the package leaves the factory complete: engine, alternator, fuel, controls, distribution and enclosure in one mobile unit.
The same platform is used for field camps, border posts, airfield ground support and civil defence installations. Units can be paralleled on site when a mission grows beyond the capacity of a single set.
Recommended Products
Ratings we specify most often for Defense & Government
Each rating below is a published row from the brand model tables. Open Size range for the full span, or View for the engine and alternator details.
CM-BD825
Diesel generator set built around the Baudouin 6M31G825/5 engine, rated to ISO 8528-1.
- Standby rating
- 825 kVA
- Prime rating
- 750 kVA
- Engine platform
- 6M31G825/5
- Frequency
- 50 Hz
CM-FP275
Diesel generator set built around the FPT C87TE3 engine, rated to ISO 8528-1.
- Standby rating
- 275 kVA
- Prime rating
- 250 kVA
- Engine platform
- C87TE3
- Frequency
- 50 Hz
Solution Highlights
What makes the difference in this application
Rapid deployment
Starts on arrival — no complex site assembly or commissioning work.
Modular and transportable
Compact, container-friendly frames for road, sea or air freight.
High mobility
Designed to be relocated as operations move.
Parallel-capable
Link units on site for higher power or N+1 redundancy.
How projects are delivered
From load schedule to commissioning in defense & government
The same three stages run on every order, whatever the configuration: engineering before the quotation, a documented load test before packing, and support after the set is on site.
Step 01
Engineering and sizing
Load schedule, starting currents, ambient and altitude derating are worked through before a rating is proposed — the alternator is sized for the largest step, not the average.
Step 02
Factory build and load test
Assembly, wiring and paint in one works, then a four-point load bank run at 25 / 50 / 75 / 100 % with the test sheet serial-numbered to the set.
Step 03
Shipping, commissioning and support
Export packing, documentation and commissioning guidance, with spare-parts supply and remote diagnosis for the life of the installation.
Related Reading
Further reading on Defense & Government power
Technical articles and product updates relevant to this application.
Ready to buy?
Send us the load profile, site conditions and redundancy requirement. A Cunmi sales engineer will come back with a sized recommendation and budget quotation.
I'm ready to proceedHave a technical question?
Sizing, paralleling, noise limits or grid codes — our application engineers answer specification questions before you commit to a configuration.
I have a questionNeed service or spares?
Consumables, long-lead items and overhaul kits for the twenty most common platforms, held in regional hubs and quoted with honest lead times.
I have a service request